Recent content by BN75

Exchange 2007 is End of Life in 2017 - no support or patches for over 2 years ( unless you have contract extension ). Possibly a TLS version mismatch? Like the server only supports TLS v1.0 but the client only supports / is requesting TSL v1.2?

Hi All, I have read several threads; notably this one : https://www.tek-tips.com/viewthread.cfm?qid=1603738 Regarding the ENBLOCK timer and SIP trunks. I have adjusted our timing settings and informed users to press the # key to send numbers down the SIP Trunk. I am wondering if that...

Hi theBteam. Thanks a bunch that was it. I changed your work flow slightly by adjusting the Dummy Tone and System Attributes(160-161) at the same time then executing a single reboot. The warble came up as expected. I had poked through the Gain & Cadence Control previously but couldn't make...

Hi All, We have an MFIM 100 and are in the process of changing over from ISDN PRI to SIP Trunk / VoIP lines. SIP Trunks are provisioned directly by the MFIM - no external VOIM is used. When picking up a CO line or making an outbound call on the legacy ISDN lines the user will hear a classic...

Hi Cody64, Thanks! That was it exactly. We have PRI ISDN line for inbound Fix was to log into Web Admin interface PGM-231 - Flexible DID Conversion Locate the Index that needs adjusting Left Click the Index number ( EG 150 ) Wait for popup window to load Change name as required Click Save...

Hello Everyone, I have been lurking on and off for some time and have found some valuable suggestions however this time I am stuck. We have a small IPECS MFIM 100 system using Station Groups configured as Ring Groups to display different names on handset LCD screen when a different number is...