Recent content by BMB1475

Hello to all, has anyone ever designed a vector in the ACM that could be used to select and record specific announcements remotely rather than utilize the remote-access dial in? I have a significant number of users that are now remote and i would love to provide them with an IPO style call tree...

Hello all. First I would like to thank you all for jumping in here with you input. I am happy to report that I was able to utilize the WAN port into the old network in order to get the site to site SCN up and working. We ran a direct line into the old network switch into the WAN port and as it...

That is correct. The old setup was a flat network and the system at both sites A & B were on the same subnet. I think we have found and issue on the physical connectivity on the old network. If I resolve then I think the wan port option should work.

So, i am currently doing some of this real time,I have tried the WAN port or LAN 2 port option: 1. I set the LAN 2 port to the systems original IP address of 192.168.0.250 2. I set the target IP of the IP Trunk at Site A to the IP of the control unit at Site B of 192.168.0.57 3. I changed an IP...

Thank you for the reply. I can't remove the point to point at this time as it is still in use for data connectivity for site B to access serves still on the old network at site A. I had my network team even remove the ACL on my new VLAN to test and I still couldn't get SCN up.

Hello Community, I have a question and please be aware that I haven’t done this in some time so if it’s a dumb question I apologize. I have two IPO IP500V2 systems 7.0.23 on both. They were connected on a single network using a dedicated PTP circuit. Site A has the control unit (192.168.0.250)...

I dont mean to sound like i dont know what I am doing but I dont know this interface as well as when i started the IPOP and I spend alot more time with CM now a days. I can see the LVMAIL files in the Embedded File Manager but what am I looking for..? Brian M Battagliola www.chsli.org

Hello All, I am sure that I havent looked hard enough for the answer to this one but here it is. I have a customer that is on an IPO 500 V2 7.0(23) with the 2 port Embedded Messaging. Small office only two mailboxes assigned. One is a person the other is the main hunt groups mailbox. in the...

I have TN2224CP boards and all are HW10 and FW015, I installed the system back in July... Brian M Battagliola www.chsli.org

Hello Tek Tips Forum Users, I have an Avaya CM config with S8730's running 5.2.1 service pack 9. I have been experiencing two weird issues with my digital phone ports. First issue is that every now and then I will get a help desk call stating that a phone has a high pitch squeal on it when...

yeah, i know all the cli commands and i have even pushed SW image files to the other lsp's on the network, upon further reveiw and using the tftp method i have come to realize that this just takes alot longer than i had expected and i geuss that is due to the use of the tftp and the connectivity...

i have a customer that has four G250 gatesway configured for SLS so there are no S8300 servers local to the gateways... is there a way to untilize another S8300 server on the network somewhere to use its TFTP function so that i can update the firmware of these sites remotely. Brian M...

Yes Brian M Battagliola www.jumacorp.com

Hello All, I am having a difficult time getting up an H.323 trunk for the connection between the IPO and the CM... CM is a 5.2.1 and the IPO is 6.0 I have done IP trunks between these two system types before just not on these versions. I seem to have the trunk programmed correctly and just for...

I built it in a test environment and it followed the tenant number of the station. thanks for the replies..... Brian M Battagliola www.jumacorp.com