Recent content by BlueStuff

Check the payload size. (20). It should be in the docs.

Example Add a route 301. fill in the external number without the predail digit 9. Create a destination code 301. Select route 301, absorb length All. When 301 is dialed 301 is stripped, and only the external number is send. The numbers you use in the destination codes (301) should be unique...

Its in the network. The sets use direct media path. Are the sets on the same site?

Not in that manner. Use system speed dial. Or use the routing options.

Hi, I had a similar issue, with Imaging a harddrive. I used sata 3 disks and they dit not work This was the answer I got from a tek-tips member “ucxguy (Programmer) 20 Oct 12 14:01 Hi BlueStuff! Does the bottom LED turn green for about one second, then it changes back to amber (i.e., both...

Thx ucxguy, You’re spot on. That exactly what happens. When I use an older 80 GB drive it worked like a dream. The drives I used are not that large, about 160 GB But they were all sata 3. Many thx,

Thx for your reply. The system is dos not get there yet. The bcm50 will not respond to a ping, on the console port. putty can’t connect.

just image a BCM450 R1 drive. Tested it. The bcm450 R1 powerd up perfectly. Not sure what is going wrong on the bcm50.

Hi all, I wanted to image a R5 disk for our stock. I downloaded the files from avaya. Used acronis to create the new drive. No trouble so far. But when i use the new drive in a spare bcm50 R5 It won’t boot. After a brief moment the power and system led turn orange and stay orange. The fan...

Do you use the ipview rcc5?

ITEL HDview

You have to "cold reset telephony services" There you find the localization settings. All telephony programming will be erased. Administrator – Utilities – Cold reset. In the Telephony resources. Expansion: select DTM-PRI.

ore re-image the drive to a R1

you cant just swap the drives. its a upgrade R1 --> R3. Inorder for the licences to stick you need the upgrade key.

Its on the bcm browse to the ip of your bcm. Ore from rls5 use this https://bcm ip/apps/public/userApps.htm