Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by amitde

  1. amitde

    M2250 Console-conference

    Well got it. The issue was with the usage. Line 1 was trying to conf with Line 2 which is not possible.
  2. amitde

    M2250 Console-conference

    Hi, I have 4 console in my sites.When trying to make conference, i am able to get up to 2 people and then when i hit the conference button it disconnects the call.Transfer is working fine. Only the problem with Conference.Can anyone help me out. >ld 21 PT1000 REQ: prt TYPE: att TYPE ATT_DATA...
  3. amitde

    BCM PRI connection

    Can some one guide me on how to connect a PABX to BCM400 through PRI? I've a v.32 card for the BCM. Thanks, Amit
  4. amitde

    VM issue

    Sites are connected through ITG Trunk.
  5. amitde

    VM issue

    Well switch is 11c 25.40B and Call Pilot 2.01.27. The Call Pilot is located on a different site though. VM # in the switch is configured as CDP->DSC. Also, when I remove the revert DN, and a call comes to that extension and it goes to VM, then 2nd call comes to that extension but heads...
  6. amitde

    VM issue

    Well it seems issue with all extensions.
  7. amitde

    VM issue

    Its Call Pilot. Revert DN is set to reception. Removed it, still no good.
  8. amitde

    VM issue

    ext 4608: the first call goes to 4608 when busy it goes to voicemail, if a third calls comes in the call does not go to voicemail, it goes to the revert DN of the mailbox. This occurs when the second call is currently leaving a voicemail. Any help?
  9. amitde

    Remote INI

    Thanks a ton.
  10. amitde

    MWI on 3904 sets

    Hi there, I've this unusual problem. Follows.... 3 extensions MWLamp is constantly on, swapped phone sets, removed mwa key, re-configured extensions, but no good. Sending across the configs.. ==================== x1021 follows... ==================== DN 1021 CPND CPND_LANG...
  11. amitde

    Remote INI

    Could someone help me with the commands for giving an INI and SYSLOAD to small and large systems? Thanks in advance, Amit De
  12. amitde

    outgoing calls blocked

    extension can receive internal and external calls bit can't make outgoing calls [internal/external]. Its an analog extension. Thanks, AD
  13. amitde

    81c INI issue

    Hi following I got from the pdt logs.... 213 :(28/4/06 17:17:56.444) BERR705 EXC 1: Bus Error in Task "tSL1" (0x8d10fe0) SR=0x3000, PC=0x5017aea, Addr=0x13122f80, SSW=0x850010 214 :(28/4/06 17:17:56.449) BERR700 EXCH: Threshold exceeded; vector=0x2, PC=0x5017aea, fault...
  14. amitde

    unknown errors on 11c mini

    Hi, I am getting these continous unknown errors on my 11c mini rls 4t.... APR 20 11:02:05 VGW: Warning channel 8 received invalid User Input message 12 from Call Server Any help????? Thanks, AD
  15. amitde

    Time on switch

    Is this wht you are talkin about..... OVLY SID 0 BKGD 044 PBXH 01 TODR 01 DROL 034 037 038 043 044 060 135 137 <------ MID's ???? MULTI_USER ON Thanks, AD
See more

Part and Inventory Search

Back
Top