Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by adam307

  1. adam307

    Phones Randomly Lose Dial Tone

    Hi, I have Avaya 9611G phones. Randomly one will lose dial tone. The next day it will work again. This has been going on for a year or more and we have not been able to make any progress in figuring this out. Until today while in testing we were able to move the affected phone's IP address to a...
  2. adam307

    Will non Avaya phones work on CM system?

    Hi, I'm looking for an alternative to the Avaya 3645 IP wireless phone. Is it possible to use an IP wireless phone from another manufacturer on an Avaya system?
  3. adam307

    How to change the wait for dial-tone after hookswitch transfer

    Forgot to say we're on CM 6.3, G450.
  4. adam307

    How to change the wait for dial-tone after hookswitch transfer

    We just moved our 911 center to a new building. Several analog "admin" lines made the move too. These lines are used for non-emergency calls to 911. They are also used to make calls out. The numbers were moved from a Definity to an Aura system. In the old system, when an incoming call was being...
  5. adam307

    Time On 9611g phones is drifting

    We were originally synced to the Spectracom. We only changed it because the time began to drift badly. It had worked for a long time before this happened.
  6. adam307

    Time On 9611g phones is drifting

    Hi, thanks for the reply. System Updates Time On Station Displays was set to "n". I have changed it you "y". The time is about one minute off right now. Our NTP server is a Windows box that is pulling its time from a Linux Spectracom box.
  7. adam307

    Time On 9611g phones is drifting

    Hi, thanks for replying. "display time" show an incorrect time. ntpq-p shows: remote refid st t when poll reach delay offset jitter ============================================================================== 159.238.153.70 .LOCL. 1 u - 64 377...
  8. adam307

    Time On 9611g phones is drifting

    Hello. I have a G450 with CM 6.3 running on System Platform in High Availability mode. I know that the time does not come from the gateway but from the System Platform. We have set the NTP server on System Platform twice now. After rebooting the time will sync but begins to drift right away. We...
  9. adam307

    Trying to develop a "kill switch" for 9611G phones to replace the analog toggle on dig/ana

    Thanks! That looks like just what I needed.
  10. adam307

    Trying to develop a "kill switch" for 9611G phones to replace the analog toggle on dig/ana

    I work for a local government and one of my client offices is the sheriff's department. They have several "pods" that house the inmates. Each pod has an analog or digital phone. In the IT closet there are physical toggle switches for each of these phones to kill them in the event of an inmate...
See more

Part and Inventory Search

Back
Top