Recent content by ACSscott

I was going to make the same direct media path suggestion on the IP phones. On the digital phones, not that you need to worry about it anymore, but I was going to say that would have to be the carrier. Probably still the carrier, but you can do some due diligence on your side by using Monitor...

TouchToneTommy nailed it with a more detailed description of what I said. "Use Internal Data" makes the SIP tab of the user override the Nsi number in the shortcode. And in the shortcode you don't need dial direct, just dial.

You should be able to give user shortcodes for people in group 1 that's say, 8N to dial with group 2 CID. The number would be NsiXXXXXXXXXX where the X's are the number of the outbound CID. Unless they're always calling out with that number, then just make it a user 9N shortcode, assuming that's...

I don't think you can do it that way. You need to have 11.1 BIN files on your computer in a folder. Get the IPO booted up and working with the 12.1 card in there and connect to it with Manager. Go to File > Preferences and the Directories tab. Set the BIN files directory to the folder where...

Nikos I think you're right, although I'd add that if it's a fresh IPO out of the box, the first time you turn it one it takes the sw level of the SD that's in it. So I think needing to prep the new chassis with a fresh SD is not necessary. I'll finish the way Nikos did, please if any of this is...

biv343 - I had no idea you could use a 500v2 as an analog gateway for ACO. Great info, I'm looking into that right now. derfloh - We did discuss that briefly!! Also you are the MAN! BernPed - Something was sticking in my craw about your post where you said you'd only put in an on prem with...

Shaun E is correct, there is H323 mode on the J series. Seems to me like you'd be doing twice the work setting the phones up H323 and then converting to SIP later, but it's an option. In trying to remember why I set one up in H323 mode before, I think I recall that the J series phones in SIP...

I personally have had a very different experience, at least on the technology side, with RingCentral. We switched from our on-prem IPO to RingCentral for our company five years ago and it has been great. Call quality is always perfect if you have good internet and we experienced a single one...

I think you might be on the right track with the forwarding settings. Can you post a sysmon trace of the failure? If there's a 403 forbidden maybe it's putting a number the provider doesn't like in the SIP header. I've seen that toss calls into voicemail. You should be able to see what's in the...

The biggest difference to me is that the J series are SIP and so can be used on cloud platforms like RingCentral or Avaya Cloud Office (which is just Avaya whitelabeling RingCentral anyway). So if there's a plan to move to the cloud someday, those phones have future use where the 96xx do not...

I'd echo budbyrd on that; was it connected to a station or trunk port on the Definity? I'll also add that I've seen where an IPO connecting to an amp needs something like a Viking FXI-1 in between, but with a pagepac I wouldn't think it would need that.

In the Gmail account security settings, you need to "allow less secure devices". I'd also test it out with an SMTP service that you know works for sure. All of the systems that I had been using Gmail for stopped working about a year ago.

1979 could definitely be right, but not being familiar with IP Flex I have to ask... IS it a PRI? If it's not, and it's a SIP trunk, you could control it from the user's SIP tab assuming the SIP URI is set to use internal data.

The telephone number field does nothing, it's just for note keeping. Give it a line appearance ID, let's say 701 as long as that doesn't conflict with anything else on the system. Then go to a phone (user in manager) that you want to test it on and assign it to an available button (appearance >...

That's actually what I have it doing now; that works fine and rings all the phones, since it's just one call from the doorphone. But, the customer needs it back to the previous configuration that was working in 9.1 so they can get video pop on all of the desktops. Still haven't found a solution...