Recent content by 4thright

I rebooted the system and tried again. I have tried 57, and 63 and 64 now; all the same results ("There were errors when trying to apply the changes").

47-1-17

I tried Edge in Explorer mode, and actual IE in an XP virtual machine with the same results. I just get "There were errors when trying to apply the changes" in the upper right. Could it be something else? Is there a log somewhere with more detail about whatever errors are occurring?

@CoralTech, any Idea why I cannot edit 47-01-17 even via WebPro?

FWIW; here's the manual pages I keep trying to walk through...

Here's features from WebPro:

Not having luck trying to configure by individual program either. For example, if I go to 47-1-17 on PCPro and set the port range for 57-72 (as reflected in the blade config above) it doesn't stick; and I can't put anything in WebPro, it just resets to 0 when I click apply.

this a continuation of this old thread: https://www.tek-tips.com/threads/nec-sv8100-config-help.1829915/ I am still trying to get voicemail working. I try to enable InMail by clicking this check-box: After applying it shows in the config: After I upload, the InMail disappears. Whether...

Not finding the "Admin CD zip file"; am I looking in the right place? I tried to download items from IP Office 10.1 General Availability Software (Full Suite), but it's not letting me with my 3rd-party login. When I registered I saw something about using a 'customer number' is that something...

I don't have the stand-alone application, just clicking a link in the admin menu for the system; so it's trying to run a browser applet. Is the stand-alone application free to download and use?

Cool; I was able to download and install that; but how do I use it to run the applet? I tried checking the tutorials but just got sales-pitch stuff really...

I've tried setting the Line Signaling for CO and CPE, without seeing any difference; do I need to reboot or do something else to apply changes? I have a link on the Admin menu for "System Status" but it's a java app; I tried to setup a VM running XP so I could access, but haven't found the old...

It is SIP based (not sure if there are any pure TDM T1s anywhere these days), but I have visibility into the carrier-side and can see the calls being sent. The circuit works when plugged into an NEC SV8100 but I need to test with the IP Office also.

Set for T1, expecting 4 digits

I have an Avaya IP office that I am trying to install a 24-channel voice T1 (robbed-bit/CAS). The T1 card is installed and synched up with the T1, but I can't get calls in or out. I have no admin experience with Avaya; I have Webmanager access and the manual it links to, and I've gone through...