Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Increase volume on analog phone 1

Status
Not open for further replies.
pguerrero

pguerrero

IS-IT--Management
Apr 6, 2004
26
US
I have an analog phone on a NEAX2000 IVS PBX that is not loud enough. Is there a setting or switch that controls this?

Thanks,

Pedro
 
Sort by date Sort by votes
Unfortunately there is not. YOu can do 1 of 2 things:

1) Adjust the PAD on your trunks BUT it will affect the system.

2) Get an analog phone with an amplified handset. (which is what I would do)

Gary

 
Upvote 0 Downvote
Set Command 1309 to a "0" for the analog sets. This will remove the 6dB pad on the station(s).
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

thomen00
  • Question
NEC SV9100 Analog Communication Interface
Replies
4
Views
286
daddybadger
daddybadger
sparrow102891
  • Locked
  • Question
NEC NEAX2000 IPS Analog phone with display config
Replies
2
Views
85
OzzieGeorge
OzzieGeorge
dartzz63
  • Locked
  • Question
Phone compatability
Replies
3
Views
106
CoralTech
CoralTech
Kasim521
  • Question
NEC SV8100 - Phone display always disappearing 1
Replies
4
Views
263
phadobas
phadobas
Mirzapur
  • Locked
  • Question
SV 9100 IP Phone web access Port number
Replies
2
Views
113
DoubleDriveLine
DoubleDriveLine

Part and Inventory Search

Sponsor

Back
Top