Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Dialogic boards in Hot Swap slots

Status
Not open for further replies.
CoderRob

CoderRob

Programmer
Sep 9, 2001
12
US
I am experiencing problems when using multiple Dialogic D/480-JCT-2T1 boards in Compaq DL380 server machines. In some cases they work, but in most cases I get problems detecting the boards or starting them once they are detected.

I have seen rumors that there were problems with that Dialogic model when running in a Hot Swap slot; the issue was related to high power consumption requirements of the Dialogic card. Allegedly a second revision (Rev 2 or Rev B?) of the D480 hardware resolved this.

Does anyone have any information on this or similar problems with the hardware combination that I described above?

Thanks,

Rob
 
Status
Not open for further replies.

Similar threads

Tele-tech
  • Question
Fluke TS44 Deluxe Replacement Cords in Canada?
Replies
7
Views
306
telemarksman
telemarksman
actbala
  • Locked
  • Question
Dialogic DM/V 1200A_4E1 configuration
Replies
0
Views
60
actbala
actbala
Atechguyy
  • Locked
  • Question
Swap Super Cap Capacitor on Existing Samsung IDCS 16 ??Before it dies.
Replies
1
Views
117
hostedguru
hostedguru
solidpro
  • Locked
  • Question
complete global international necessary digits in a sheet?
Replies
0
Views
69
solidpro
solidpro
DTDude
  • Locked
  • Question
Oldest in-use system you are aware of
Replies
2
Views
106
Dexman
Dexman

Part and Inventory Search

Sponsor

Back
Top