squirrel error: Batch Close Failure(-7)...

it's not THAT bad at getting back to people...

But anyways...

The error message you are receiving comes from invalid data on one of the cards.

The numbers in the bracket usually point to which card it is.

However it is quite misleading at most times, which is why Squirrel support calls Visanet, since they can tell us exactly which card needs to be adjusted

What I would do as a start is to look through your voucher detail report and try to find any cards that look "weird"

ie.
0 dollar amounts
really long card numbers
funky auth codes
and cards that don't start with the standard numbers
amex -- 3
visa --4500 and up
mastercard -- 5100 and up
Discover 6011 and up

If all else fails ... call Squirrel support with a ref# which I hoped they supplied you, they will get you to fax the CCVDR over and will need your 7 digit V# (found by going into Squirrel\data\tomorrow, enter DOS type SD2, then enter, then type drvcfg... keep pressing enter until you get a bunch of info, auth numbers etc... it's in there)

They will then call Visanet and have the card number

Best times to call are in the evening... about 2-3 hours before your closing time, or first thing in the morning
From experience this process can take an hour at the right times

Oh and if you DO find the funcky card... recreate it in the check adjustments or simply delete it then do a paid in next business day

Hope that helps

BTW... squirrel now has an email support system which works reallllllly good and fast
Check it out