Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

PCL Macro on printer hard drive.

Status
Not open for further replies.

feldman

Programmer
Oct 2, 2002
2
CA
We are currently testing an inline macro as a PCL overlay. We would like to load the macro to the hard drive of our Xerox N.. printers and be able to call up the macro in subsequent prints. Howto?
Thanks,
 
My guess is that you will have to ask Xerox. You are
talking about a hard drive internal to the printer,
aren,t you?

Normally, you would use the HP Resource manager software
to handle this and maybe it will work, but I suspect that
HP might have it set to only work with their printers.
I would try that first. Let us know if that works. You
should be able to download the Resource Manager from

Otherwise, you will have to bone up on the PJL filesystem
commands. There is a chapter devoted to that in the
PJL Reference Manual.

Jim Asman
 
Took a look at the HP site, but, they state they no longer support Resource Manager. Will look into contacting Xerox and checking PJL Reference.

Thanks,
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top