definity password question 1

BuckWeet · Apr 26, 2002

I have an older definity G3Si BCS v8 switch that has been pulled out of service, the original flash card that was with the switch is gone, I just got a new flash card for it and was wondering if there is a default password so I can at least get into the switch to upgrade it to 9.5 software. I know if i want to get RTU's for it, i need to have avaya or someone authorized to do it, I'm just looking to get it up and running enough to upgrade the software (we have the orange flash card with r9.5)..

Any ideas ? would it be like a craft login?

BuckWeet

kva · Apr 26, 2002

Default password for craft login is the same for R8 and R9. By the way, to upgrade to R9 you must replace PROCESSOR and NETCON too.

BuckWeet · Apr 26, 2002

whats the default craft login password?

as for the upgrade, i was told that proc could be upgraded.. oh well, i'll still like to get the switch up even if its r8.

Thanks

BuckWeet

pansophic · Apr 29, 2002

BuckWeet,

Contact me off-list and I will see if I can set you up.

Try spyke_at_erols.com.

Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

definity password question 1

BuckWeet

IS-IT--Management

kva

IS-IT--Management

BuckWeet

IS-IT--Management

pansophic

MIS

Similar threads

Part and Inventory Search

Sponsor