Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

merge tti code?

Status
Not open for further replies.

fonegirl

Technical User
Jan 30, 2002
39
US
What is the code you enter on a telephone to assign it an extension on the Definity System?

Thanks
 
Each system can have its own number. Look in your CH FEA for this, there will be two of them. One to move off the ext., one to reconnect it. It also might have a pass code. The pass code is under CH SYS FEA page 2.
Let me know Look!!! New Buttons
Same amount of time!

Thanks All Phoneman2
 
The merge code in the fac is 24 and the unmerge code is 25. How do you enter that on the phone?
Thanks for your help.
 
Is there a star or pound sign before it? if so then you hit speaker, get dial tone, enter first fac then (if pass code is used enter that) then the ext number. If done correct you hear a double tone. Beep Beep :) When you connect a ext. to a phone just use the connect fac then the ext. number. Beep Beep Look!!! New Buttons
Same amount of time!

Thanks All Phoneman2
 
If its not working, make sure tti is turned on. An easy way to find out LI CON ALL if you have Ts in the open ports its turned on. If you have Us its not turned on.
Let us know if it worked Look!!! New Buttons
Same amount of time!

Thanks All Phoneman2
 
The dial sequecnce would be as follows:

{Merge or Seperate TTI code}, TTI password(if enabled in "change system features"), then the extension number.

Thanks

Chris
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top