Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Daylight Saving Time

Status
Not open for further replies.

BIS

Technical User
Jun 1, 2001
1,893
NL
Hello All,
Its about that time of the year again. I have a small problem though. It seems one of my boxes has changed itself from rule 1 to default rule 0. Also, from Daylight-Saving to standard. If I do a set time, and change these two fields I get this cryptic message, and I am not allowd to actually make the change.

"Daylight saving is in effect, please verify date and time"

Any ideas?
 
Sorry - never mind...
Seems that if you only chage the rule (0 to 1 f.ex.) and leave the type as 'standard' it works. Seems a bit confusing. Does anybody have a clue as to what the 'Daylight Savings' type is or does?
 
The type Standard or Day-Light saving only tells you in what mode the switch is...
So if you want to set it up right now before the Day-Light saving starts it will tell you that is is on Standard.
Rule "0" is empty and the rule "1" is standard set to the US day-lightsaving rule, overhere in Europe we have to set it up that it starts at or the first sunday after March 25th.
Now only find a way to change the Audix to the European Day-Light saving.... :-(

Hope this helps to clear the confusion..

John
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top