What does DRT Line031 or Line032 mean? I have a customer that gets DRT Line031. They answer the call but no one is there. When they get this message the phone rings differently than if the caller went through the phone system and selected someone on the calling tree. How do I stop this? What is going on here?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
What does DRT Line031 or Line032 mean?
- Thread starter Mike CVT
- Start date
curlycord
Programmer
It's rings as if it's an Intercom call because it comes in on the Intercom button.
For instance reception does not have those lines on their phone and AA is not programmed to pick them up so it DRT's to the "Prime Set"
Card 1:
Line 001 = Line 1
Line 002 = Line 2
Line 003 = Line 3
Line 004 = Line 4
Card 2:
Line 031 = Line 5
Line 032 = Line 6
Line 033 = Line 7
Line 034 = Line 8
DRT = Delayed Ring Transfer
DRT to Prime = Y or N
DRT Ring Count = How many rings to a device before it DRT's
DRT programming is on under System/Feature settings.
Under each line in Line programming is where you set the "Prime Set" DN.
None = nowhere
221 (default) = reception
You can bump up the ring count if there is a conflict.
It's hand if they are AA 24/7 and vmail crashes then lines will DRT to reception.
Similar conflict can apply for Transfer Callback
It sounds like they have extra lines terminated to the phone system but not programmed.
Have a tech test those ports on the KSU for dialtone.
=----(((((((((()----=
Toronto, Canada
Add me to LinkedIN
For instance reception does not have those lines on their phone and AA is not programmed to pick them up so it DRT's to the "Prime Set"
Card 1:
Line 001 = Line 1
Line 002 = Line 2
Line 003 = Line 3
Line 004 = Line 4
Card 2:
Line 031 = Line 5
Line 032 = Line 6
Line 033 = Line 7
Line 034 = Line 8
DRT = Delayed Ring Transfer
DRT to Prime = Y or N
DRT Ring Count = How many rings to a device before it DRT's
DRT programming is on under System/Feature settings.
Under each line in Line programming is where you set the "Prime Set" DN.
None = nowhere
221 (default) = reception
You can bump up the ring count if there is a conflict.
It's hand if they are AA 24/7 and vmail crashes then lines will DRT to reception.
Similar conflict can apply for Transfer Callback
It sounds like they have extra lines terminated to the phone system but not programmed.
Have a tech test those ports on the KSU for dialtone.
=----(((((((((()----=
Toronto, Canada
Add me to LinkedIN
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question