Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

VLAN file location

Status
Not open for further replies.

crazygordon

Technical User
Oct 28, 2018
29
0
0
US
I am trying to change the IP 500 IP Address but it seems like there is VLAN file running that keeps pointing to old IP Address. Would any one know what is the name of this vlan file and where it is located? I thought it would be 96xxupgrade.txt but I can't seem to find it. Thank you.
 
Does the system have a 46xxspecials.txt file present with information listed under the heading '############### LAYER 2 VLAN AND QOS SETTINGS ##############' ?


Thanks, Tim
Adelaide, Australia
 
HI Tim,

I could not located the file "46xxspecials.txt", thank you.

Tony
 
Hi Tony,

OK - Are you running any DCHP options on your network for options 242 or 176 pointing the phones to the VLAN?

If not, maybe you just need to access the CRAFT menu and check the items under 'ADDR'. At the bottom, it will list VLAN details.

Thanks, Tim
Adelaide, Australia
 
Hi Tim,

According to the email from the vendor (he is no longer in business) there is 242 option but I cannot locate where this option file or setting is located. The DHCP is being set by sonicwall and not IP office. AM I supposed to look in the sonicwall?

Any idea where this 242 option file is located? Thank you.

Tony
 
Hi Tony,

Derfloh is correct - the DHCP options are coming from the SonicWall. It's not a file, it's a setting in the SonicWalls DHCP options.

Option 242 will look something like this:

MCIPADD=X.X.X.X,MCPORT=1719,HTTPSRVR=X.X.X.X,L2Q=1,L2QVLAN=10,VLANTEST=0

In the above example, the VLAN is 10 and the X.X.X.X represent the IP Address of the IP Office.

Thanks, Tim
Adelaide, Australia
 
Hi guys,
OK let me look in the sonicwall, it might take days before I report back, thank you!

Tony
 
1) If the phones are using a VLAN, that was a deliberate change made by someone, potentially to optimize VoIP over non-VoIP traffic. If that was all done properly, there will be other changes in the networks routers and firewalls to optimize the VLAN quality of service over others networks. Long-short: Putting the phones all back onto the same LAN as everything else may be reopening a can of previously resolved voice quality issues.

2) As folks have said, its usually whichever device is doing DHCP for the network that tells them they should go to the VLAN (aka. virtual interface or sub-interface) and request a VLAN address there. The wrinkle with VLAN is it does allow scenarios where more than one DHCP server can be running on the network, one for the initial network and one for the VLAN. Rarer, but possible.

3) You really haven't told us why the IP Office address needs to change? What is being added/removed/changed on the network that means the IP Office needs to move?


Stuck in a never ending cycle of file copying.
 
Tim was correct, the 242 option was in my SonicWall, and I have been able to make my IP change.

Thank you everyone!
 
Glad I could help. Cheers.

Thanks, Tim
Adelaide, Australia
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top