Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Trouble Shoot for Remote Workers and SBC

Status
Not open for further replies.
LJDirk

LJDirk

Programmer
Jun 14, 2002
157
DE
Hello,

Setup an Server Edt. (9.1.7) with Avaya Session Border Controller (7.01)and Remote Worker.
Following the DevConnect Paper with any diffrents for the Certificates Thing.

The following are working:

1. One-X Mobile Client registered with SIP and XMPP to the SBC / IPO
2. Making Calls from 1XMobile to any external Number (over PRI) with Speechpath working

Now the Problem:
If i Called from external (over PRI) the only 1XMobile User, than in the "traceSBC" Trace from SBC i can see a "403 forbiden" Message from the SBC to the IPO after the INVITE from the IPO to the SBC.
In the SBC Dashboard i can see under INSIDENTS two Messages: One for the "INVITE -> no Subscriber Flow Matched" and one for the "ACK -> General Method not allowed Out-of-Dialog".

I don´t see the forest for all the trees not more....

Played with the EndPoint Flows but no luck.

Obviously it is of eminent relevance, that I this, what you celeprate, not optimally effective assume, since the integrate of you in the communicative system as code related terms with me no explosive associations in mental-empirical reproduction process of the mind.
 
Sort by date Sort by votes
Sounds like you have a problem with your Subscriber flow. Should look something like this;
Slide71_u9ua8x.jpg


ACSS (SME)
 
Upvote 0 Downvote
played with the flows but no success. what are the right flow? server or subsciber? think also server how you provided.

Obviously it is of eminent relevance, that I this, what you celeprate, not optimally effective assume, since the integrate of you in the communicative system as code related terms with me no explosive associations in mental-empirical reproduction process of the mind.
 
Upvote 0 Downvote
For remote worker you need both a server flow (to got to and from the IPO) and a subscriber flow. Server flow below

Slide69_aun5s2.jpg


ACSS (SME)
 
Upvote 0 Downvote
can you show me the Trunk Routing & Server Profile? I don´t know what i´m must set in the Server IP / Domain Feld because the Remote Worker IP´s are many different?!?

Obviously it is of eminent relevance, that I this, what you celeprate, not optimally effective assume, since the integrate of you in the communicative system as code related terms with me no explosive associations in mental-empirical reproduction process of the mind.
 
Upvote 0 Downvote
You only need one server profile and that will be the IPO. The remote worker is configured using End Point Policy Groups and Routing profiles.

Can you post a picture of your server flow and subscriber flow?

ACSS (SME)

 
Upvote 0 Downvote
yes shure:

for_Tek-tips_g9cttb.jpg


Obviously it is of eminent relevance, that I this, what you celeprate, not optimally effective assume, since the integrate of you in the communicative system as code related terms with me no explosive associations in mental-empirical reproduction process of the mind.
 
Upvote 0 Downvote
Can you show me the detail of the SIP_Routing Routing profile?

Also, on the Media Interface for the Subscriber flow, I think this needs to be Internal and not external (int_RW for example)

Lastly, I think you need to have a separate Routing Profile for the Subscriber flow.



ACSS (SME)

 
Upvote 0 Downvote
Hi, Problem solved: The Server Config (Global Profiles -> Server Config -> General) was wrong. The "Server Typ" must be "Call Server". It was "Trunk Server" - for whatever reason....

Thanks for Support

Obviously it is of eminent relevance, that I this, what you celeprate, not optimally effective assume, since the integrate of you in the communicative system as code related terms with me no explosive associations in mental-empirical reproduction process of the mind.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

vtt2019
  • Locked
  • Question
SBC Remote Worker: IM with one-X Portal doesn´t work
Replies
2
Views
423
derfloh
derfloh
vtt2019
  • Locked
  • Question
SBC - remote J100 phone getting SIP 481 Call/ Transaction Does Not Exist 1
Replies
3
Views
492
derfloh
derfloh
sheldoom
  • Locked
  • Question
Virtual SBC Root Password
Replies
4
Views
397
derfloh
derfloh
finest
  • Locked
  • Question
Need help programming/fixing Avaya SBC (ASBCE)? 3
Replies
0
Views
516
finest
finest
shermosillo
  • Locked
  • Question
Certificate question for IP500 w/SBC
Replies
1
Views
156
PhonesTech
PhonesTech

Part and Inventory Search

Sponsor

Back
Top