Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Avaya 9611G?
- Thread starter hawks
- Start date
Technically they should.....I once had a 9630 working on SIP until someone donated a new IP Office for me to test with the UCx. When I plugged the SIP phone into IP Office, it erased the SIP firmware and installed H.323.
If I could get a 9611 for a reasonable price, I would try getting it working on my lab system UCx.
Joseph Sus Jr. Nortel Enthusiast
If I could get a 9611 for a reasonable price, I would try getting it working on my lab system UCx.
Joseph Sus Jr. Nortel Enthusiast
- Thread starter
- #3
The phone functioned exactly as an SIP phone would, except that I don't think I was able to get the MWI light working. It's been a while. If I could find a 9600 pure SIP phone again somewhere, for a good price, I would try it out again. Let me see what else I can find out.
Joseph Sus Jr. Nortel Enthusiast
Joseph Sus Jr. Nortel Enthusiast
- Thread starter
- #5
Oh man, loading the SIP firmware is a nightmare......I wish I knew how to do it. Are there any IP Office people you can talk to? Don't dare write on their Tek Tips site asking the question....they will snap your head off. An Avaya tech will surely be able to help you load the SIP firmware.
Joseph Sus Jr. Nortel Enthusiast
Joseph Sus Jr. Nortel Enthusiast
- Thread starter
- #7
Be careful, they don't like the E-MetroTel people ![[surprise]](/data/assets/smilies/surprise.gif "[surprise] [surprise]")
Joseph Sus Jr. Nortel Enthusiast
Joseph Sus Jr. Nortel Enthusiast
- Status
