Zone Management

[aramirez148]

Does anyone know the patch number that keeps the Zone bandwidth under control, so it does not get to high? I am on Succ. 3.0 Opt 81C CPP. Any help would be appreciated.

Andy Ramirez
NNCSS BCM 3.0

What thaaa????

 

[dlesap]

Never heard about such a patch....
QoS have to be implemented on Network to keep priority for voice paquets.

For newer release, PVQM have to be set up correctly

 

[Slackliner]

Please elaborate... I was under the assumption that zones are user defined: BB (best bandwidth (@ g7.29)) and BQ (best quality (@ g7.11)). Are you suggesting that you have a session that is using more bandwidth than the g7.11 codec (~64 kbps)? How out of 'control' is your bandwidth session?

 

[aramirez148]

Here are a few more details on my situation.
In LD 117 when I PRT ZONE, my Intrazone displays

Bandwidth 100000Kbps
Startegy BQ
Usage 48450
Peak% 49,

Before we upgraded to Succ 3.0 we had a patch installed that would keep the percentage used between 8-17%
after the upgrade we lost the patch and of course no one kept record of the patches that had been installed so we have to go in thru PDT and clear it manually. Anyone have an idea on what patch I am needing to install?

Andy Ramirez
NNCSS BCM 3.0

What thaaa????

 

[dlesap]

If such a patch exist, it was a toll patch specially write for that situation. Is that still necessary for you or do you accept to have bandwith increase up to 49% ?

A toll patch is billed each time you want to upgrade...(thx Nortel...)

You may find a trace of that patch in /u/patch/. The patch files are not deleted during upgrade. Only unloaded