Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Zone bandwidth management to multiple zones

Status
Not open for further replies.

absinthium

IS-IT--Management
Aug 28, 2003
104
AU
Hi All,

I have an issue with zone bandwidth management for calls to multiple zones.

Scenario:
Zone 1 - Head Office
Zone 2 - Main Office
Zone 3 - Branch Office

The WAN link between Zone 1 and 2 is 100MB
The WAN link between Zone 3 and 1 is 10MB
The WAN link between Zone 3 and 2 is 10MB

Disregarding QoS for now, I have configured Zone 1 INTERZONE BW as 10MB as that is the smallest link.

Now I have a problem with calls between Zone 1 and Zone 2 as there is a 100MB pipe linking them with only 10MB of calls allowed.

How can I configure specific zone-to-zone bandwidth management so that calls between Zone 1 and 2 allow for 100MB.
 
put Head office and Main Offic in Zone 1 set for Intrazone 100Mb and interzone 10 Mb with same VPNI on both switches. Set Branch to zone 2 Interzone 10Mb.

May limit your internal calls but depends on the number of users. The other option is set it up the same as above but set the Intrazone of Zone 1 to 1000000 and hope that you do not go over the 100Mb on intersite calls between Head/Main Offices.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top