ZfD4 & Imaging Service

[InfrArch]

Hello All!

I setted up an OS on 2 Gb partition. (Overally a HDD has 20Gb disk). Then I created an image file.
When I'm recovering a workstation from that image file during this process ZfD creates the same 2Gb partition on the PC and recover an image there. How I can define , that an image must be recovered by using all available HDD space on the targed PC, but not the original (was on the source PC) 2gb partition?

Thanks!




Victor K
MCSE+I;MCSA;MCSE(w2k);CNE(5.1);CNE(6);CIWSP;CIWSA;Net+;CCNA

 

[ITsmyfault]

see this troubleshooting paper:

http://www.novell.com/documentation/lg/zdpr/index.html

There is a whole section on this.

hth
- Joe

 

[InfrArch]

Thanks to ITsmyfault. Unfortunately in this articles you recommended there is no info about my question. But, I solved the problem by myself:
You can edit an image by using Image Editor standard ZfD tool. Open an image. Right click on it, - properties. There you can define the size of the newly created partition during workstation reimaging. That's all!



Victor K
MCSE+I;MCSA;MCSE(w2k);CNE(5.1);CNE(6);CIWSP;CIWSA;Net+;CCNA