ZESA missing in LD117

[trentsteenholdt1]

Hi All.

Am I missing something with this or is it something like a feature that i dont have?

I have a branch office that I'd like to get ZESA working so E911 calls will go out via the branch office PSTN (PRI), but for some reason I'm not getting any prompt out for ZESA either by PRT, CHG, NEW etc.

I've run out all the commands in ld 117, and it's not visible.

Am i missing something?

Cheers,

Trent Steenholdt

Systems Engineer
The University of Notre Dame Australia

-Great scott!

 

[GHTROUT]

When I search the books, it appears that ZESA was first used in Release 7.x

What release is your system?

--
Nortel Resources at GHTROUT.com World Famous!
--

 

[trentsteenholdt1]

Hrmm, im running release 7. Both on the cs1000 and the branch office. :-/

Cheers for the tip though GHTROUT. Very handy for someone reading this in the future im sure.

Cheers

Trent Steenholdt

Systems Engineer
The University of Notre Dame Australia

-Great scott!

 

[Firebird Scrambler]

I've seen a reference to ZESA at release 03.00.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[curtismo]

ZESA disappeared when we upgraded from 6.0 to 7.5. I believe it has been replaced by ERL.