Xpressions Voicemail

[jschnarkey]

This may be the wrong forum but I cannot find an Xpressions forum
I know Xpressions has a numbering Plan in the OSV but where in Xpressions does it reference this NP?
I want to change the outbound routing but I do not want to change the existing NP. I would rather write a new one and then make the switch and leave the old one intact as a fall back
Also, the same question for APP builder.

Jake​

 

[Moriendi]

Been a while since I touched either of those things but the Xpr knows nothing about OSV numbering plans. It's aware of a destination IP address and it fires native SIP messages at it. That's all it knows.

In the OSV, either endpoint or endpoint profile I can't remember, that's where I'd expect to see the numbering plan info. It's the OSV which decides what numbering plan to use, not the Xpr.

 

[LoPath]

I think this is what you're looking for.....

You have to log into the Xpressions server, open the XPR Monitor, and go to the ipApl, then select Edit Settings to get here.

Regarding App Builder, open the help and look at section 2.3 "Configuring a Vogue Script". It tells you you have to go to XPR monitor, ipApl, and add a VoiceGuide Script protocol.

LoPath
Maintain HiPath 4000 V5 & V6, OpenScape Xpert V4 & V6, OpenScape Xpressions V7, OpenScape Contact Center V8, OpenScape Voice V9