TechieTony
IS-IT--Management
Hello All,
I have been extremely frustrated with a recent upgrade from 9.1.1 to 10.4. I found that my model was the "ibook Dual USB" and bought an full install disk of 10.4 online. I tried to install the DVD and got this message:
"Startup Disk was unable to select the installl CD as the startup Disk(-2)"
After some research I tried to upgraded my firmware which I found was open, made sure my laptop was upgradable "which it was", and made sure my disk was the appropriate one... which it is. I am currently working with 9.2.2 and trying to upgrade to 10.4 and I am getting the same error.
I was reading a post in which a guy had the same problem as me and he mentioned XPostFacto4. I did some research and downloaded the application but I immediately ran into another problem....
When I start XPost Facto There are basically 2 boxes, this is what I see:
SELECT VOLUME: (Greyed Out)
ibook Harddrive
XPF 4 requires 10.2 or Later
SELECT CD: (not Greyed out)
Mac OS X 4 install DVD
Mac OS X 4 install CD
Now I was reading in the release notes that XPF 4 would update 9.2.2 to 10.4 "thats what its made for correct?" but I cant figure out for the life of me why the SELECT VOLUME selections are grey and 10.2 is required to run it??
Am i missing something..
Also on another note I am not to cheap to signup for XPF for help its just I don't want to sign up and find the product will not work at all. Ill register if I have a serious error during installation!
Noncentz
I have been extremely frustrated with a recent upgrade from 9.1.1 to 10.4. I found that my model was the "ibook Dual USB" and bought an full install disk of 10.4 online. I tried to install the DVD and got this message:
"Startup Disk was unable to select the installl CD as the startup Disk(-2)"
After some research I tried to upgraded my firmware which I found was open, made sure my laptop was upgradable "which it was", and made sure my disk was the appropriate one... which it is. I am currently working with 9.2.2 and trying to upgrade to 10.4 and I am getting the same error.
I was reading a post in which a guy had the same problem as me and he mentioned XPostFacto4. I did some research and downloaded the application but I immediately ran into another problem....
When I start XPost Facto There are basically 2 boxes, this is what I see:
SELECT VOLUME: (Greyed Out)
ibook Harddrive
XPF 4 requires 10.2 or Later
SELECT CD: (not Greyed out)
Mac OS X 4 install DVD
Mac OS X 4 install CD
Now I was reading in the release notes that XPF 4 would update 9.2.2 to 10.4 "thats what its made for correct?" but I cant figure out for the life of me why the SELECT VOLUME selections are grey and 10.2 is required to run it??
Am i missing something..
Also on another note I am not to cheap to signup for XPF for help its just I don't want to sign up and find the product will not work at all. Ill register if I have a serious error during installation!
Noncentz