I get the bluescreen of death when trying to boot.
When it is booting in safemode I see all the drivers loading until it gets to agpCPQ.sys. At which point it stops and goes to blue screen message above.
it looks like
long line of drivers....
long line of drivers....
long line of drivers....
long line of drivers....
Mup.sys
alim1541.sys
amdagp.sys
agpCPQ.sys (IT STOPS HERE FOR SECOND AND GOES TO BLUESCREEN -NOTE BY CHRIS)
I have XP Pro and I have my OEM disk. I do not want my programs or data lost.
Code:
A problem has been detected and Windows has been shut down to prevent damage to your computer.
.
If this is the first time youve seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to be sure you have adequate disk space. If a driver is identified in the Stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.
Check with your hardware vendor for any BIOS updates. Disable BIOS memory option such as caching or shadowing. If you need to up Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Option, and then select Safe Mode.
*** STOP: 0x0000007E (0xC0000005,0xf849EA8D, 0xF88CE528, 0xF88CE224)
isapnp.sys - Address F89EA8D base at F897000, Datestamp 3b7d8559
When it is booting in safemode I see all the drivers loading until it gets to agpCPQ.sys. At which point it stops and goes to blue screen message above.
it looks like
long line of drivers....
long line of drivers....
long line of drivers....
long line of drivers....
Mup.sys
alim1541.sys
amdagp.sys
agpCPQ.sys (IT STOPS HERE FOR SECOND AND GOES TO BLUESCREEN -NOTE BY CHRIS)
I have XP Pro and I have my OEM disk. I do not want my programs or data lost.