Has anyone ever done a PRI install from XO on a Magix? I know we discussed this recently. XO has me worried. They say that they only support NI1 and NI2. I think it was said that neither will work, only AT&T Custom 5ESS will. Starting to get concerned here - this could be a real problem.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
XO Communications, PRI and Magix.
- Thread starter pmcook
- Start date
kwing112000
Vendor
I did them years ago and normally the IAD could support ATT custom. you may just need to push them harder.
Kevin Wing
ACSS Small and Medium Enterprise (SME) Communications
ACS- Implement IP Office
ACA- Implement IP Office
Carousel Industries
Kevin Wing
ACSS Small and Medium Enterprise (SME) Communications
ACS- Implement IP Office
ACA- Implement IP Office
Carousel Industries
tdaugirdas
Technical User
NI-1 will work just fine. Set the Legend/Magix T1/PRI Switch-type to DMS100.
Tom Daugirdas,
STCG, Inc.
stcg.com
Tom Daugirdas,
STCG, Inc.
stcg.com
- Status
Similar threads
- Locked
- Question
- Locked
- Question