Xnet

[donbru01]

Hi at all , i have setup XNET between two ICP3300 and work fine .
How many Voip channel i can use ?? all 200 ?? or there are limit from license or dsp .
ps. all call G711

Thanks

bruno.donetti@axitea.it

 

[kwbMitel]

If IP Trunks what is your available bandwidth?
- G711 calls approx 100K / Call

If TDM trunks how many do you want to use of what's available?
- Total trunk usage = total calls +1


**********************************************
What's most important is that you realise ... There is no spoon.

 

[donbru01]

hi kwbmitel , i have no problem for bandwith , about 8mb only for voice.
my question is if there are problem with license limit , i need 32 iptrunk between 2 icp3300 and i think if is mandatory purchase other license?
thanx

 

[kwbMitel]

There is no licensing for IP trunks on 3300's.

You said XNET, this implies standard 3300 IP networking.

The only consideration for trunks is bandwidth for IP and quantity of trunks or cost of LD if TDM

**********************************************
What's most important is that you realise ... There is no spoon.