Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

XML Path

Status
Not open for further replies.

Cobby1812

IS-IT--Management
Jun 22, 2006
58
GB
Hi there,
I had a reply back from the forum telling me to use @, however (please see below) as you can see I have to repeat The Section SectionCode and InformationLine LineNumber etc
any clues on how to do this would be gratefully received.

- <CaseInformation>
- <!-- CL Lookup Details -->
- <Section SectionCode="CL">
- <InformationLine LineNumber="1">
- <AnswerName>
<LookupNameRSN>102</LookupNameRSN>
</AnswerName>
</InformationLine>
</Section>
- <!-- Defendant Details -->
- <Section SectionCode="D">
- <InformationLine LineNumber="1">
<AnswerAlpha>Billy Bonds</AnswerAlpha>
</InformationLine>
- <InformationLine LineNumber="3">
<AnswerAlpha>XMas Ltd</AnswerAlpha>
</InformationLine>
- <InformationLine LineNumber="5">
<AnswerAlpha>Somewhere Cold</AnswerAlpha>
</InformationLine>
- <InformationLine LineNumber="7">
<AnswerAlpha>North Pole</AnswerAlpha>
</InformationLine>
- <InformationLine LineNumber="9">
<AnswerAlpha>BRR RRR</AnswerAlpha>
</InformationLine>
- <InformationLine LineNumber="17">
<AnswerAlpha>0101012121</AnswerAlpha>
</InformationLine>
- <InformationLine LineNumber="20">
<AnswerAlpha>BBOnds@hotmail.com</AnswerAlpha>
</InformationLine>
</Section>
- <!-- Supplier Details
-->
- <Section SectionCode="SP">
- <InformationLine LineNumber="3">
<AnswerAlpha>Elves R Us Ltd</AnswerAlpha>
</InformationLine>
- <InformationLine LineNumber="4">
<AnswerAlpha>Elf Number 1</AnswerAlpha>
</InformationLine>
- <InformationLine LineNumber="5">
<AnswerAlpha>Cold Place</AnswerAlpha>
</InformationLine>
- <InformationLine LineNumber="6">
<AnswerAlpha>Norway</AnswerAlpha>
</InformationLine>
- <InformationLine LineNumber="7">
<AnswerAlpha>Norway</AnswerAlpha>
</InformationLine>
- <InformationLine LineNumber="8">
<AnswerAlpha>BRR TRD</AnswerAlpha>
</InformationLine>
- <InformationLine LineNumber="10">
<AnswerAlpha>01254 478547</AnswerAlpha>
</InformationLine>
</Section>
- <Section SectionCode="CBD">
- <InformationLine LineNumber="1">
<AnswerAlpha>Elf Bank</AnswerAlpha>
</InformationLine>
- <InformationLine LineNumber="2">
<AnswerAlpha>21-11-11</AnswerAlpha>
</InformationLine>
- <InformationLine LineNumber="3">
<AnswerAlpha>1111111</AnswerAlpha>
</InformationLine>
- <InformationLine LineNumber="4">
<AnswerAlpha>545454 454 5454</AnswerAlpha>
</InformationLine>
- <InformationLine LineNumber="5">
<AnswerAlpha>ELF54rE</AnswerAlpha>
</InformationLine>
</Section>
</CaseInformation>
 
I would think I would be way out of place to tell a member how to ask a question, this and the previous one that this post is supposed to be a followup. People would conclude that you may not really want to get help. You just want to make a declaration or something!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top