Xlate Problems

[br0ck]

I have a pix 501 and all is well
Except when i get in in the morning (i'm the last one) I have to do a cl xlate inorder to access the internet
Are the timout settings my problem?


PIX Version 6.1(1)
arp timeout 14400
global (outside) 1 65.xx.xxx.236 netmask 255.255.255.248
nat (inside) 1 192.168.1.0 255.255.255.0 0 0
static (inside,outside) 65.xx.xxx.235 192.168.1.251 netmask 255.255.255.255 0 0
static (inside,outside) 65.xx.xxx.238 192.168.1.250 netmask 255.255.255.255 0 0
static (inside,outside) 65.xx.xxx.237 192.168.1.11 netmask 255.255.255.255 0 0
access-group 100 in interface outside
route outside 0.0.0.0 0.0.0.0 65.xx.xxx.233 1

Filter(config)# sh timeout
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h323 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute

 

[yizhar]

HI.

How many client computers in the network?
Yizhar Hurwitz

http://come.to/yizhar

http://teachers.sivan.co.il/yizhar

 

[br0ck]

less than 8 Brock D. Mowry,MCP
Hardware Specialist
iNETCA LLC
Miami, Fl

 

[Guest_imported]

I've the same problem now. Did U got the solution?

Thanks,

 

[Guest_imported]

Contact me at amoustapha@sakoncam.con so that we could solved this out.

Thanks again,

 

[yizhar]

HI.

Some similar issues with pix 501 might be solved by upgrading to pix 6.2(1) - it is recommended to open a case at Cisco TAC if you didn't yet solve it and if you do not have the latest pix OS.

Bye
Yizhar Hurwitz

http://come.to/yizhar

http://teachers.sivan.co.il/yizhar