Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Xircom 56T Problem with Window 95/HP Omnibook 5500CT

Status
Not open for further replies.
dablues

dablues

IS-IT--Management
Jun 27, 2001
2
0
0
US
I am trying to test a Xircom Credit Card Modem 56T using Windows 95 on a friend's older HP Omnibook5500CT. In Modem Properties, I can run a successful Diagnostics (i.e., Command/Response) is fine and Device Manager shows the modem is working properly. However, when I attempt to dial, I get a sudden disconnect. In the Connection properties/Call preferences, I specify "Wait for dial tone before dialing" and do not cancel the dial if not connected within a certain number of seconds.


I am not certain what the problem might be....

Your help is greatly appreciated.
 
Status
Not open for further replies.

Similar threads

stoobiedoo
  • Locked
  • Question
Windows 10 softmodem will only connect at 2400
Replies
1
Views
145
LoPath
LoPath
tanu1985
  • Locked
  • Question
send sms with bluetree 5600v2 modem
Replies
0
Views
48
tanu1985
tanu1985
tomx2
  • Locked
  • Question
Dial-up Modem disconnect problem.
Replies
2
Views
81
G0AOZ
G0AOZ
smitty98
  • Locked
  • Question
modem vs router connection problems.
Replies
0
Views
52
smitty98
smitty98
speaktek
  • Locked
  • Helpful tip
Comcast Modem Issues...Not working with router.
Replies
0
Views
42
speaktek
speaktek

Part and Inventory Search

Sponsor

Back
Top