Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Xerox WorkCenter Pro 45

Status
Not open for further replies.

nickner

IS-IT--Management
Oct 27, 2005
1
CA
Hello,

Can somme one tell me I'm not the only one having problems whit that machine (Xerox WorkCenter Pro 45).

Problem 1) Somme time whit no rison the machine pop on the panel "No communication on line fax 1" but the machine are already on the line??? Xerox do not have a good answer.

Problem 2) Windows XP pro SP2, Office 2003, Network print queue on server windows 2000 sp4 . In Word document the filigrane print incorecly like big square instead of letter. Xerox have no response.


In the past I think Xerox is a good company but now I'm not sure.

Please help me I have no more idea.
 
Problem 1: When powering off/on or coming out of power save the machine will check the line, if the reply does not come back quickly machine will display no communication on this line but if you cancel the message the fax still works. Timing cannot be changed, this is not a fault it just a message that at start up your line seems to be inactive.

Problem 2: If using the PCL driver this problem could be a font problem as the PCL driver only uses True Type fonts. You could try to print as an image or try the Postscript driver.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top