Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Xerox Phaser 1235 Serivce Menu?
- Thread starter CSUKNic
- Start date
1- Enter the diagnosis mode by pressing and holding the Menu (1) and Enter (4) keys as you turn on the printer.
2- Press the Menu (1, 5) keys to scroll through the list of test unit NV-RAM INITIAL appears on the upper display.
3- Press the Item (2, 6) keys to select either Table 1 or Table 2. The tables determine which NVRAM items will be initialized.
4- press and hold value (3) for 10 seconds to initialize the items of the selected table.
2- Press the Menu (1, 5) keys to scroll through the list of test unit NV-RAM INITIAL appears on the upper display.
3- Press the Item (2, 6) keys to select either Table 1 or Table 2. The tables determine which NVRAM items will be initialized.
4- press and hold value (3) for 10 seconds to initialize the items of the selected table.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question