gm1963
Technical User
- Feb 22, 2008
- 1
Hi there,
Have two Phaser 1235 printers both of which fell ill. Here are the symptoms for both:
1. Stuck in the Replace Magenta and Cyan Imaging Drum menu, even thought I put in a different (not new, but lightly used) set of carts and cartridges. I gather there is some hidden secret menu where one can reset this, but don't know how to get there. Ideas?
2. When booting, gets stuck in the "Fuser Upper Error T1" Power Off/On screen. I put in a fuser from a known working printer - same issue. I try a different motherboard from a known working printer - same issue. Ideas?
Your help and responses are greatly appreciated.
Regards,
Greg
Have two Phaser 1235 printers both of which fell ill. Here are the symptoms for both:
1. Stuck in the Replace Magenta and Cyan Imaging Drum menu, even thought I put in a different (not new, but lightly used) set of carts and cartridges. I gather there is some hidden secret menu where one can reset this, but don't know how to get there. Ideas?
2. When booting, gets stuck in the "Fuser Upper Error T1" Power Off/On screen. I put in a fuser from a known working printer - same issue. I try a different motherboard from a known working printer - same issue. Ideas?
Your help and responses are greatly appreciated.
Regards,
Greg