Xerox Lamp Replacement Phaser 8200 lamp type??

[Delphiwhat]

Guys

I just cracked open my 8200 Phaser to replace the lamps but have stumbled across a problem....

I'm in Great Britain (240v ac) but the lamps that I have taken out of the machine are 120v ac 150W (4 11/16")

I cannot get 150W lamps over here that are 120v or the right size.



I seen lamps in

http://www.hdsupply.com

part no 312790 (which i was going to import) which are rated at 130v ac 150W. Would these do even though the voltage rating is 130vac and not 120vac?

http://hdsupply.crossmediaservices....isplayPageNumber=500&&&PromotionPageID=348116

Even if some of you guys could give me a supplier and part number that you have successfully replace that would help a lot.
I don;t want to replace the lamps with something that
is going to cause problems and i dont want to pay Xerox the £400 for replacing them.

Or could someone give me a supplier in europe?? HElppp!

seteve

 

[TCouch]

The lamps we use are made by "Satco" and are part number S3142. Hope this helps.

Timothy N. Couch
A1 Printech
Anchorage, AK