Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

XEROX 7760 CYAN ATC SENSOR FAILURE

Status
Not open for further replies.

colorprinters

Technical User
Mar 19, 2005
12
US
XEROX 7760 CYAN ATC SENSOR FAILURE AT POWER ON,BEFORE THIS WAS PRINTING CYAN SPOTS DOTS OVER THE ENTIRE PAGE,i CHECKED THE CYAN DEVELOPER TO SEE ANY EXCESIVE TONER SPILLED BY THE DEVELOPER,BUT
IT LOOK FINE,THEN IN THE MIDDLE OF PRINTING THE MENU MAP.

MESSAGE:CYAN ATC SENSOR FAILURE
SERVICE REPORT 004-354
CONTROL TO IMAGE LOGIC BOARD TIMING FAILURE
 
First thing I would do is swap out the Image Unit and Toner, and if that doesnt work, the problem lies in the sensor itself. I might be able to get you a PDF of the service manual. But 9 out of 10 times, the consumables are the culprit.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top