x64 drivers..

[Titann]

Hi All,

We have recently upgraded to x64 on our storage nodes and are having a problem with our drivers.. its intalls fine but i cannot see my tape devices... here is an output of my inquire... our backup server is still on x64.. the problem is we have 2 servers where the istallation worked fine..

If there is any info you require to assist just shout as i not sure what info would be relevent..

Microsoft Windows [Version 5.2.3790]
(C) Copyright 1985-2003 Microsoft Corp.

C:\Documents and Settings\jeromesw>inquire -l

-l flag found: searching all LUNs, which may take over 10 minutes per adapter
for some fibre channel adapters. Please be patient.

Error in nt_lus_get_inquiry; error was 1
The operation completed successfully.

scsidev@0.0.0:TEAC DW-224E-V C.CA|CD-ROM
scsidev@2.0.0:HP HSV200 5000|(Unknown Device Type c)
S/N: P8BC8F3AAS7033
WWNN=50001FE150069160
PORT=00000004
scsidev@2.0.1:HP HSV200 5000|Disk
S/N: P8BC8F3AAS7033
WWNN=600508B400106A2E0000C000017D00

PORT=00000002
scsidev@2.0.2:HP HSV200 5000|Disk
S/N: P8BC8F3AAS7033
WWNN=600508B400106A2E0000C000018200

PORT=00000002
scsidev@2.0.3:HP HSV200 5000|Disk
S/N: P8BC8F3AAS7033
WWNN=600508B400106A2E0000C000047800

PORT=00000002
scsidev@2.0.4:HP HSV200 5000|Disk
S/N: P8BC8F3AAS7033
WWNN=600508B400106A2E0000C000044500

PORT=00000004
scsidev@2.0.5:HP HSV200 5000|Disk
S/N: P8BC8F3AAS7033
WWNN=600508B400106A2E0000C000044700

PORT=00000004
scsidev@2.0.6:HP HSV200 5000|Disk
S/N: P8BC8F3AAS7033
WWNN=600508B400106A2E0000C000044900

PORT=00000004
scsidev@2.0.7:HP HSV200 5000|Disk, \\.\PHYSICALDRIVE8
S/N: P8BC8F3AAS7078
WWNN=600508B400106A2E0000C000047300

PORT=00000004
scsidev@2.0.8:HP HSV200 5000|Disk
S/N: P8BC8F3AAS7033
WWNN=600508B400106A2E0000C000018C00

PORT=00000002
scsidev@2.1.0:HP HSV200 5000|(Unknown Device Type c)
S/N: P8BC8F3AAS7078
WWNN=50001FE150069160
PORT=00000002
scsidev@2.1.1:HP HSV200 5000|Disk
S/N: P8BC8F3AAS7078
WWNN=600508B400106A2E0000C000017D00

PORT=00000002
scsidev@2.1.2:HP HSV200 5000|Disk, \\.\PHYSICALDRIVE3
S/N: P8BC8F3AAS7033
WWNN=600508B400106A2E0000C000018200

PORT=00000002
scsidev@2.1.3:HP HSV200 5000|Disk
S/N: P8BC8F3AAS7078
WWNN=600508B400106A2E0000C000047800

PORT=00000003
scsidev@2.1.4:HP HSV200 5000|Disk, \\.\PHYSICALDRIVE5
S/N: P8BC8F3AAS7033
WWNN=600508B400106A2E0000C000044500

PORT=00000002
scsidev@2.1.5:HP HSV200 5000|Disk
S/N: P8BC8F3AAS7078
WWNN=600508B400106A2E0000C000044700

PORT=00000003
scsidev@2.1.6:HP HSV200 5000|Disk
S/N: P8BC8F3AAS7078
WWNN=600508B400106A2E0000C000044900

PORT=00000002
scsidev@2.1.7:HP HSV200 5000|Disk
S/N: P8BC8F3AAS7078
WWNN=600508B400106A2E0000C000047300

PORT=00000002
scsidev@2.1.8:HP HSV200 5000|Disk
S/N: P8BC8F3AAS7078
WWNN=600508B400106A2E0000C000018C00

PORT=00000002

 

[a060463xyz]

Do you haver the tape support enabled with your fc Drivers ?

You need to provide more information with your config.

 

[Titann]

Its fine, got the bug fix from EMC today..