WS-C2948G-GE-TX upgrade to enable http/cisco network assistant 1

[bangsters]

Hi.

I have a spare WS-C2948G-GE-TX lying around that I need to use. It's EOL I'm aware, but I was wondering if anyone can help me get http to work for this, or cisco network assistant. my other switches work fine with cna except this.

This is the info I get with show version (it's catos not ios)


Console> show version
WS-C2948G-GE-TX Software, Version NmpSW: 8.3(2)GLX
Copyright (c) 1995-2004 by Cisco Systems, Inc.
NMP S/W compiled on Mar 12 2004, 16:18:42
GSP S/W compiled on Mar 12 2004, 15:22:33

System Bootstrap Version: 6.1(6)

Hardware Version: 1.1 Model: WS-C2948G-GE-TX Serial #: JAE0947QCCG

Mod Port Model Serial # Versions
--- ---- ------------------ -------------------- ---------------------------------
1 0 WS-X2948G-GE-TX JAE0947QCCG Hw : 1.1
Gsp: 8.3(2.0)
Nmp: 8.3(2)GLX
2 52 WS-C2948G-GE-TX JAE0947QCCG Hw : 1.1

DRAM FLASH NVRAM
Module Total Used Free Total Used Free Total Used Free
------ ------- ------- ------- ------- ------- ------- ----- ----- -----
1 65536K 36671K 28865K 16384K 5578K 10806K 480K 289K 191K

Uptime is 0 day, 19 hours, 37 minutes

Console> (enable) dir bootflash

No such file

11065920 bytes available (4662720 bytes used)
Console> (enable) boot
Unknown command "boot". Use 'help' for more info.
Console> (enable) show boot
BOOT variable =
CONFIG_FILE variable = bootflash:switch.cfg

 

[vipergg]

You have to have a ciscoview image in order for http to work . It will "cv" somehwere in the imagename if its running the web version . If you need help with command line post back and we will see if we can help .

 

[bangsters]

can anyone send me the cv image? couldn't find it and my membership expired in cisco so i can no longer download the cv there.

 

[vipergg]

It should look something like this cat4000-cv.8-1-1.bin

 

[bangsters]

thanks! by any chance can you send me that file? i believe it's cat4000-cv.8-4-1.bin

i tried searching but couldn't find it. i believe someone here has it.

much appreciated