We have a Linksys WRT 54GX2 installed in a Senior Citizen complex. The WRT 54GX2 has worked perfectly fine but we found that the Wi-Fi area is not large enough for our needs. After speaking to a Linksys tech, we purchased a wireless access point WAP54GX to enlarge the coverage area.
Needless to say we have updated the firmware and have spent countless hours on the phone with Linksys support. They have not been able to help and have not been successful in linking the two pieces of hardware.
Has anyone had any success with the WRT 54GX2 and the WAP54GX combination? If so, please let us know what has to be done to configure them so that they work together to enlarge the coverage area.
Thank you for any help that you can provide.
Needless to say we have updated the firmware and have spent countless hours on the phone with Linksys support. They have not been able to help and have not been successful in linking the two pieces of hardware.
Has anyone had any success with the WRT 54GX2 and the WAP54GX combination? If so, please let us know what has to be done to configure them so that they work together to enlarge the coverage area.
Thank you for any help that you can provide.