Wrong number when calling

[plokijuh]

Hi guys.

I have a SIP-Q trunk between OS4K v8 and OSBX8 v3.
All calls from OSBX8 going through OS4K.
When I call any city or mobile number from any of the OSBX8 subscriber I get the same caller number which is our general number - 194807000.

I've already tried LATTR=PUBNUM in LDAT but it didn't help.

Most likely it is KNMAT.

If I get it correct TDCSU's NNO is KNMAT's ONNO and that's how TDCSU and KNMAT has connection. Correct me if I am wrong.

At the moment my TDCSU has NNO=251 and I don't have KNMAT with ONNO=251.
But I have another KNMAT which has settings I need (at least I think so). So I just changed NNO with the KNMAT I need. This change didn't help.

The KNMAT I used looks like this:
CHANGE-KNMAT:NPI=ISDN,LEVEL=0,ONNO=180,DNNO=30,CONN=A,MODCON=OUT&TRANSH&TRANSI,NUMEXT=19480;
CHANGE-KNMAT:NPI=ISDN,LEVEL=0,ONNO=180,DNNO=31&&34,CONN=A,MODCON=OUT&TRANSH&TRANSI,NUMEXT=480;

I read that MODCON should look like this MODCON=OUT&REPEXT but I haven't test it yet.

Thanks.

 

[plokijuh]

Got it work guys.

The problem was an incorrectly configured COT.

I found this:
ONNO is taken from circuit configuration of incoming circuit (AMO TDCSU, parameter NNO) if this is activated by the appropriate COT parameters

I set these COT parameters:
PAR=RCL&XFER&ANS&CHRT&KNOR&CEBC&FWDN&FNAN&BSHT&BLOC&DPRE&LWNC&ATRS&TR6T&TSCS&ICZL&DFNN&NTON

and used this KNMAT already configured in the system:
CHANGE-KNMAT:NPI=ISDN,LEVEL=0,ONNO=180,DNNO=30,CONN=A,MODCON=OUT&TRANSH&TRANSI,NUMEXT=19480;
CHANGE-KNMAT:NPI=ISDN,LEVEL=0,ONNO=180,DNNO=31&&34,CONN=A,MODCON=OUT&TRANSH&TRANSI,NUMEXT=480;

After these settings, I was able to get the correct caller number.