Wrong Date on IP phones 4

[joynew68]

Hi,

Our CS 1000 shows under ld2/ttad correct date 29/2.
But on IP Phones there is either 28/2 (1120E) or 1/3 (1150E).
How to fix it?

Thanks,

j.

 

[ChrisJGB]

Thats right.

The ip sets Phase 2 cannot detect the date 29-02. The Phase 1's are OK.

Tommorrow alle the dates are OK again 01-03-2008


Chris

 

[RS528]

This is the Nortel bulletin:

Notice:
This bulletin replaces bulletin 2008008659.1. This update has
been issued to communicate some new information regarding
the issue.
BULLETIN ID: 2008008659, Rev 2
PUBLISHED: 2008-02-28
STATUS: Active
REGION: APAC
CALA
EMEA
GC
NA
PRIORITY: Major
TYPE: Bulletin
Reissue Reason:
Update
Background:
An issue has been identified with Nortel Phase 2 IP Sets where the Date can be incorrectly displayed on Feb 29th for
Leap Year.
Analysis:
IP Phase 2 sets will have a display issue of the Date Feb 29. The display of the IP Set will incorrectly display the Date for
Feb 29th. When the date should display Feb 29 the display has shown to display either March 1 or February 28. There
is no other operational issues identified with the IP Sets functionality other than the data display.
Phase 1 IP Sets and TDM phones have not experienced any issues with the display of Feb 29.
Recommendations:
Do not attempt to restart the phone or change the date on the system as presently there is no corrective action available
to have the date display correctly for Feb 29.
Required Actions:
Once the date changes to March 1st the IP Set will need to be taken off-hook and placed back on-Hook for the Date to be
updated If the display is not already updated correctly, after March 1st.
Attachments:
There are no attachments for this bulletin
Products and Releases:
The information in this bulletin is intended to be used with the following products and associated releases:
PRODUCT RELEASE
Phones & Accessories-IP-IP Phone 1110
Phones & Accessories-IP-IP Phone 1120E
Phones & Accessories-IP-IP Phone 1140E
Phones & Accessories-IP-IP Phone 1150E
.
>TECHNICAL SUPPORT
. TECHNICAL BULLETIN
.
.
Leap Year Data format with Nortel Phase 2 IP Sets Show incorrect Date
Phones & Accessories-IP-IP Phone 2002
Phones & Accessories-IP-IP Phone 2004
Phones & Accessories-IP-IP Phone 2007
To view the most recent version of this bulletin, access technical documentation, search
our knowledge base, or to contact a Technical Support Representative, please visit
Nortel Technical Support on the web at:

http://support.nortel.com/.

You may also sign
up to receive automatic email alerts when new bulletins are published.
REFERENCE:
PRE-REQUIRED PATCH:
PATCH ID:
Copyright 2007 Nortel Networks. All rights reserved. Information in this document is subject to change without notice. Nortel assumes no responsibility
for any errors that may appear in this document. The information in this document is proprietary to Nortel Networks.
Nortel recommends any maintenance activities, such as those outlined in this bulletin, be completed during a local maintenance window.
Nortel, the Nortel logo, and the Globemark design are trademarks of Nortel Networks. All other trademarks are the property of their respective owners.
LEAP YEAR DATA FORMAT WITH NORTEL PHASE 2 IP SETS SHOW INCORRECT DATE 2008008659, REV 2

 

[RPMcMurphy]

Does this apply to phase 2 sets regardless of platform? BCM?