Hello,
I'm having an issue with writing a v4.5 Backup to a new CS1000E CP-MGS.
The issue is that when I write the backup to the CS1000E while deploying, it defaults the first Media gateway to a MGC card, but it needs to be a MGS card.
After the Deployment all the Data is present on the CS1000E and the Conversion took place nicely placing the 2 cabinets in Superloop 0 (0 0, 0 1)
I tried changing the type in Element manager with no success.
I also tried making a backup from that state, Rebuilding and deploying the system without backup, creating the MGS and MGC (0 0, 0 1) and writing back the backup, but that also overwrites the config bringing it back to 2 MGC's @ 0 0 and 0 1.
Is there a Special procedere that i have to apply to the backed up data in order to achieve all the Data on the MGS + MGC config?
Thanks in advance
Pro refers to my company, not my status
I'm having an issue with writing a v4.5 Backup to a new CS1000E CP-MGS.
The issue is that when I write the backup to the CS1000E while deploying, it defaults the first Media gateway to a MGC card, but it needs to be a MGS card.
After the Deployment all the Data is present on the CS1000E and the Conversion took place nicely placing the 2 cabinets in Superloop 0 (0 0, 0 1)
I tried changing the type in Element manager with no success.
I also tried making a backup from that state, Rebuilding and deploying the system without backup, creating the MGS and MGC (0 0, 0 1) and writing back the backup, but that also overwrites the config bringing it back to 2 MGC's @ 0 0 and 0 1.
Is there a Special procedere that i have to apply to the backed up data in order to achieve all the Data on the MGS + MGC config?
Thanks in advance
Pro refers to my company, not my status
