Write protection error and OPI issues - MX-One TSW SP2

[pcasi]

Hi Everybody i hope you all have a happy new year.

Well, we´ve just upgraded from BC9 to MX-One and i spotted a couple of things that seem wrong.

1.- Alarm code 3 Level 1: with this description and signals:

CLASS: 1
3 WRITE PROTECTION ERROR
DATE TIME ALP NOIF UNIT EQU INF1
02JAN07 09:17:01 1 1 TLP30 002-0-**-** 0

TIME DATE ERROR CODE
09:17:32 02JAN07 H'60
ADDRESS CONTROL FAILURE
LOGICAL PROGRAM ERROR ADDRESS = 02006394
ENTER
SWSW A-LEVEL SIGNAL ENTNOPSTA (H'0081)
FROM RMP (H'319) EXE A IN LIM 002
TO TLP30 (H'3A4) EXE A IN LIM 002
NUMBER OF DATA BYTES IN SIGNAL = 8
WITH 0 1 2 3 4 5 6 7 8 9
000 00 3E CF 02 FF FF 00 00
STACK ADDRESS = 0201DC8E
SIGNAL SEND ADDRESS = 0208DD28


TIME DATE ERROR CODE
09:17:32 02JAN07 H'60
ADDRESS CONTROL FAILURE
LOGICAL PROGRAM ERROR ADDRESS = 0200B72C
ENTER
SWSW A-LEVEL SIGNAL RELCON (H'010A)
FROM SCP (H'32F) EXE A IN LIM 002
TO TLP30 (H'3A4) EXE A IN LIM 002
NUMBER OF DATA BYTES IN SIGNAL = 14
WITH 0 1 2 3 4 5 6 7 8 9
000 00 3E CF 00 FF FF 00 03 83 03
010 2F 02 FF FF
STACK ADDRESS = 02004D78
SIGNAL SEND ADDRESS = 0200A214


TIME DATE ERROR CODE
09:17:01 02JAN07 H'1C
WRITE PROTECTION ERROR
LOGICAL PROGRAM ERROR ADDRESS = 0201516A
LOGICAL ERROR ADDRESS = 0100137A
PHYSICAL ERROR ADDRESS = 0566B27A
ENTER
SWSW A-LEVEL SIGNAL FETATYP (H'0085)
FROM RMP (H'319) EXE A IN LIM 002
TO TLP30 (H'3A4) EXE A IN LIM 002
NUMBER OF DATA BYTES IN SIGNAL = 4
WITH 0 1 2 3 4 5 6 7 8 9
000 00 3E CF 00
STACK ADDRESS = 0203E520
SIGNAL SEND ADDRESS = 0208EEDA


TIME DATE ERROR CODE
09:17:01 02JAN07 H'34
RECEIVING LIM ADDRESS NOT AVAILABLE
LOGICAL PROGRAM ERROR ADDRESS = 02015158
ENTER
SWSW A-LEVEL SIGNAL FETATYP (H'0085)
FROM RMP (H'319) EXE A IN LIM 002
TO TLP30 (H'3A4) EXE A IN LIM 002
NUMBER OF DATA BYTES IN SIGNAL = 4
WITH 0 1 2 3 4 5 6 7 8 9
000 00 3E CF 00
STACK ADDRESS = 0203E520
SIGNAL SEND ADDRESS = 0208EEDA

SEND
SWSW A-LEVEL SIGNAL FETATYPRES (H'007E)
FROM TLP30 (H'3A4) EXE A IN LIM 002
TO RMP (H'319) EXE A IN LIM 027
NUMBER OF DATA BYTES IN SIGNAL = 14
WITH 0 1 2 3 4 5 6 7 8 9
000 01 02 00 00 00 F0 00 00 03 00
010 00 00 00 01
STACK ADDRESS = 02009938
SIGNAL SEND ADDRESS = 02015158

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 00 99 38

2.- The OPI213 set has a very low ring volume and the display is not updating until the operator aswers a call.

Have anybody else had the same problems? And if so how were they solved?

Thanks in advance for your attention,
Pcasi.

 

[fcpli]

Your TLP30 unit has a faulty patch S111420A. Passivate it and check that the history does not appear any more. There is a replacement patch S112123A, which is available on Info Channel.
The low ring volume can be fixed with patch S112106A. depending of your market, it is/is not icluded in the SP, but you can ask for it from your nearest /// dealer.

fcpli

 

[pcasi]

Thanks for your advice Fcpli, i´ll check with our supplier (Who didn´t have a cule about the problem)

Pcasi.