Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Would like incoming lines to be heard thru paging speakers

Status
Not open for further replies.

phonesaz

Vendor
Dec 18, 2006
880
US
I have a client who would like incoming calls to ring and be heard through the paging speakers. It seems like a simple request but I have no idea where to start. I have a Magix R4 with TDL sets, line 804 is paging, and there are 3 copper lines. Any help appreciated. Thanks!
 
If the amplifier has a 90VAC "Night Bell" input, you can connect a Single Line port and program that port to ring.

If you don't have a Night Bell input, Viking Electronics makes the K600D night bell over paging adapter that is triggered by ringing (again from a single line station).

If you are using a PagePal (instead of a UPAM/TAM-B) there is a connection for a Night Bell.

If you don't have any S/L ports, you could hang a 3-line "swinger" from Skutch on the CO lines, and drive the Viking K600D from that.
 
I never looked at the back of the amp - it is a pretty decent sized bogen - I will look at the info that came with it. I was hoping there was a way to create some type of adjunct or phantom extension and have 804 ring on it - oh well -
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top