I am trying to simply print a layered file that has a photo on the bottom layer. I have text on top of it and I have lowered the opacity of the photo to 60%. When I print, the photo comes out at 100% and it is difficult to read the text. I am using a color laser printer and a PS3 driver. Any help would be appreciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Won't print the opacity that I want
- Thread starter scotaru
- Start date
mscallisto
Technical User
Have you tryed flattening the image then printing?
Note make a copy of the original image prior to flattening because once flattened there is NO un-flatten.
navigation is Layer > Flatten
Note make a copy of the original image prior to flattening because once flattened there is NO un-flatten.
navigation is Layer > Flatten
mscallisto
Technical User
OK Maybe disregard my previous post.
If you want the photo to show through the text, set the photo to 100% on the bottom layer then adjust the text to 60% on the top layer then print
If you want the photo to show through the text, set the photo to 100% on the bottom layer then adjust the text to 60% on the top layer then print
- Status
Similar threads
- Locked
- Question