Wiring off ISDN BRI 2 on to NORSTAR uk compact ccu

[sprite031]

Hi Guy

Can some one help me with this please.

I have a UK Compact plus with a ISDN 2 card but not sure where you jump the ISDN on to on the system

Thansk

 

[Firebird Scrambler]

You will need to jumper it on ports 001 to 004 or 031 to 034 if you have the ISDN 2 card in the second slot.

ISDN2 Trunk programming.
The main problem is getting the wiring to terminate correctly onto the TJF Krone strips. The circuit is normally provided via a ISDN terminal adapter with one or 2 RJ45 outlets the best way was to cut one plug of a standard RJ45 extension lead & use the following colour codes as follows ..

Green pair & Blue pair for the transmit & receive ports on e.g. Krone ports 1 & 2.

The following are the pin outs for connection of ISDN2 back up to the Telco 1 cable
Telco pin & cable colour RJ45 pin & cable colour
18a Y-GN 3 W-GN
18b GN-Y 6 GN-W
19a Y-BN 4 BL-W
19b BN-Y 5 W-BL

Once the connection has been done, you will need to unplug the RJ45 lead & reconnect it again in order for the link to be established



Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support

http://www.linkedin.com/in/davidbromley