daddybadger
Vendor
Quick question, can a NT55x IP Handset use wireless XDP to a SIP extension using the *48 feature code? Idea is to install an algo strobe and when the NT phone rings, the algo will flash.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Wireless XDP
- Thread starter daddybadger
- Start date
- Status
- Thread starter
- #3
Just tested at our KX-NS500.
1) "MicroSIP" Softphone client as W-XDP/Shared Ext to KX-NT680 IP-PT (NT680 as main, MicroSIP as slave). Call to NT680 Ext. number, both NT680 and MicroSIP rings. Works well.
2) KX-NT680 IP-PT as W-XDP/Shared Ext to "MicroSIP" Softphone client (MicroSIP as main, NT680 as slave). Call to MicroSIP Ext. number, both MicroSIP and NT680 rings. Works well.
1) "MicroSIP" Softphone client as W-XDP/Shared Ext to KX-NT680 IP-PT (NT680 as main, MicroSIP as slave). Call to NT680 Ext. number, both NT680 and MicroSIP rings. Works well.
2) KX-NT680 IP-PT as W-XDP/Shared Ext to "MicroSIP" Softphone client (MicroSIP as main, NT680 as slave). Call to MicroSIP Ext. number, both MicroSIP and NT680 rings. Works well.
- Thread starter
- #5
- Status
Similar threads
- Locked
- Question