Wireless with Wired

[CNeeds]

i'm going to install a wireless network at one of my office location. It will be 108Mbps Netgear with 4 adapters. We have 6 location around the state and every location is on the network. What settings do I need to change on the wireless router to make the wireless in our network. I added the domain, but it still on own network and cannot be seen on the wired network. thanks for any answers.

 

[bcastner]

Disable DHCP on the router.
Your DC should be the source of DHCP addresses and should be the DNS server entry rather than the router.

 

[CNeeds]

Sorry, what does DC mean??? Let say our DNS server is 192.168.1.19 and the DHCP is 192.168.1.254...Can you walk me through on how I can make this happen to work mith my wired network...Thanks

 

[ronnyjljr]

CNeeds,

Just change the settings on router to reflect a single node on the network.

You need to manually set the IP,Gateway,Subnet, and DNS Servers, which should be pretty straight forward on the Netgear router.

Hope that helps,
Ron

typedef map<GiantX,gold, less<std::shortestpathtogold> > AwesomeMap;