Wireless phone for the BCM 50 (Base)

[carlosmcse]

I need to find out what do I need in order to support wireless phones either the WLAN 2210 or the T7406. I think with the T7406 I only need an available extension for the base, what about the WLAN 2210? ANy special key codes I need to install on the BCM? I already have an IP client license code installed is this all I need to support a WLAN 2210.

 

[biv343]

7406 phones will work on the BCM 50, with one digital port required for each set. At this point the 221X phones aren't supported on the BCM 50.

 

[carlosmcse]

How is the 7406 base installed in the system I though that each base supports up to 3 cordless phones with their own extension. So the base is the only device connected to an available digital port on the BCM?

 

[biv343]

The base has three RJ-11 connectors on the unit. Each phone needs it's own digital port, but you can run three phones off one base.

BCM 50 2.0 will have support for the WLAN phones, if you can wait that long.