I have a Linksys wag54gs wireless router and a linksys wireless-g pci adaptor, i had no problems connecting wirelessly until i had to change the nic to another pci slot, now i only get an IP address and a subnet mask, there's no DNS or WINS or Default gateway.When looking at the wireless connection status it says the porblem occured because the network didn't assign a network address to the computer.I can however connect to the internet via harewire so i'm assuming there's an issue with the wireless nic. is there something i've missed to configure the wireless network correctly?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
wireless connection
- Thread starter rodwf
- Start date
syedfayum
Technical User
- Apr 6, 2008
- 2
- 0
- 0
Hiii
Check the Wireless Drivers correctly installed or not. No need to configure anything, because IP address and remaining parameters will resolved from your Wireless Router, if it connect. Or else check your Router Configuration either DHCP Enable or not. Still having problem please give brief about your problem.
Check the Wireless Drivers correctly installed or not. No need to configure anything, because IP address and remaining parameters will resolved from your Wireless Router, if it connect. Or else check your Router Configuration either DHCP Enable or not. Still having problem please give brief about your problem.
- Status
Similar threads
