Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Wireless bridging

Status
Not open for further replies.

camercad

ISP
Feb 10, 2005
12
US
I have a customer that bridged an outbuilding to her main facility with a DWL-810+. Since these have become end of life the only solution I could come up with to utilize her external antenna's was a buffalo networks ethernet converter. I can ping everything on the lan and even see other computers in the neighborhood but cannot get out to the internet. As this is just a bridge and should be transparent to the network I'm not sure where the problem is. Any help would be appreciated.
 
I may need to be more specific on this setup.

Both sides were the DWL-810+ in ad-hoc mode. No access point are in this equation.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top